Whatever product you design, be it a metal bracket, a medical device or a welded Fabrication, you want to be sure your design will meet its functional requirements.
But how do you know it will and how can you ensure it does?
Most customers will use hand calculations, gut feeling or experience of previous designs to consider the design good enough to meet its requirements. Too often it leads to over design which has a knock-on effect of increasing product cost
You might decide on physical prototyping for some critical products but probably don’t have the time to test each individual design scenario. At what point of the design do you make the prototype? And how do you investigate the test results and adjust the design itself?

Experience tells us that only the most critical product designs are tested and often very late in the design process – Leaving a small amount of time to make design modifications.
For some companies, the preference might be to outsource testing or simulation to external companies. How many tests do you need to run? What is the cost and how do you iterate between your design team and the external team to implement the changes highlighted by the simulation?
Whatever methods you are using now, there might be a better approach which will help you achieve the technical insight you need to make better more informed decisons and design better products?
The SOLIDWORKS Simulation suite of tools helps the designer to test designs as a natural part of the design process, allowing you to make changes early in the design process, ultimately reaching a better design specification much sooner.
SOLIDWORKS Simulation Standard is a great place to start, with its low cost of £3,150, and will answer 4 key questions regarding product performance and durability.
- Linear Static Analysis calculates the stresses and deformations of a 3D model to determine the response of parts and assemblies due to the effect of forces, pressures, temperatures and contact between components
- Trend Tracker helps product engineers detect trends in results from different iterations of a static study. It enables you to measure the impact of his design changes on this criteria, such as Factor of Safety, stress level andweight
- Time-Based Motion Analysis offers a true physical calculation of the forces and motions of an assembly as it would move under environmental loads (external forces) and/or internal loads (motors, springs, and dampers)
- Metal Fatigue Analysis examines how repeated or random load cycles can cause structural failure providing insight into product lifecycles
SOLIDWORKS Simulation Standard enables designers to take two, complementary approaches to design analysis: Design for Strength, considering the ultimate strength of their components and Design for Life for fatigue prediction.
Discover how SOLIDWORKS Simulation Standard, structural analysis fully integrated inside SOLIDWORKS 3D CAD, – Have a look here at our Video
